Agilent Technologies Option H48 Multiport Test Set Z5623A Uživatelský manuál Strana 14

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 16
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 13
14
Z5623A test sets
Designed to work with the PNA series of network analyzers
The graphical multiport application interface is used to set up measurement paths, sequences, and calibration states. The multiport automation interface
based on the COM concept is provided allowing external test executive development in a variety of popular languages.
Frequency range:
5
1 MHz to 9 GHz
Connectors: Type-N (f)
Impedance: 50 ohm I/O control: GPIB and parallel
Option
Designed for:
Ports
Switching Raw (uncorrected)
6
Raw (uncorrected)
Test set type
(Works with:) type/speed return loss insertion loss
20 dB, 10 MHz to 1.3 GHz 7.0 dB, 10 MHz to 1.3 GHz
H46
1
PNA Series
6 Solid state/11ms
14 dB, 1.3 to 3.0 GHz 8.0 dB, 1.3 3.0 GHz
Triplexer
10 dB, 3.0 to 6.0 GHz 9.5 dB, 3.0 to 6.0 GHz
(8753E/S)
2
7.0 dB, 6.0 to 9.0 GHz 11.5 dB, 6.0 9.0 GHz
26 dB, 1.0 MHz to 1.3 GHz 1.5 dB, 1.0 MHz to 1.3 GHz
H48
1
(871xD/ES)
2
8 Mechanical/50ms
24 dB, 1.3 to 3.0 GHz 2.0 dB, 1.3 3.0 GHz
Full crossbar
16 dB, 3.0 to 6.0 GHz 2.5 dB, 3.0 6.0 GHz
14 dB, 6.0 to 9.0 GHz 3.5 dB, 6.0 9.0 GHz
> 16 dB, 10 MHz to 1.3 GHz > 8 dB, 10MHz to 1.3 GHz All paths except
> 14 dB, 1.3 to 3 GHz > 9 dB, 1.3 to 3 GHz between R1+, R2+,
H39 N3381A/82A/83A 9 Solid state/11ms
> 10 dB, 3 to 6 GHz > 10 dB, 3 to 6 GHz and R3+ and R1-,
> 13.5 dB, 6 to 9 GHz > 13.5 dB, 6 to 9 GHz R2-, and R3-
N441x series of balanced measurement test sets
3
Requires the N1930A Physical Layer Test System software or N4425A Balanced Measurement Software to control the system, apply four-port error correction,
and calculate and display parameters.
Switch type: Solid state Impedance: 50 ohms
Model Designed for:
Ports Frequency range Test port connectors Test set type
Number (Works with:)
N4415A 8753ES Option 006,014 2
4
30 kHz to 6 GHz 7 mm Full crossbar
N4416A E8357A Option 015 2
4
300 kHz to 6 GHz 7 mm
N4417A Option 103 E8358A Option 015 2
4
300 kHz to 9 GHz Type-N (f)
N4417A Option 104 E8803A Option 014 2
4
300 kHz to 9 GHz Type-N (f)
N4418A 8720ES Option H32, H42 2
4
50 MHz to 20 GHz 3.5 mm (m)
N4419A E8362B Option 014, UNL 2
4
10 MHz to 20 GHz 3.5 mm (m)
N4421A E8364B Option 014, 711 2
4
10 MHz to 50 GHz 2.4 mm (m)
1 Test set has four external control lines to enable control of module switching during test
2 Additional adapters and RF cables are needed to connect the test set.
3 N441x family of test sets are controlled by an application running on an external PC
4 Test sets connect to network analyzer through front panel jumpers. System uses the two ports of the network analyzer and the two test set ports for
four system test ports.
5 The Z5623A H46 frequency range is 10 MHz to 9 GHz.
6 Return loss of test set port not used in measurement path.
Duplexer/Triplexer = Tests normal transmission and receive paths only. Not all port to port path measurements are possible
Full crossbar = Measurements between all ports are possible.
Zobrazit stránku 13
1 2 ... 9 10 11 12 13 14 15 16

Komentáře k této Příručce

Žádné komentáře