Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Instalační příručka stáhnout pdf (Strana 35)

Installing Logic Analyzer Cards and Probes 2

16900 Series Logic Analysis Systems Installation Guide 35

6 To verify the flex cables are installed correctly, use an ohm meter to

check continuity between the pair of test points associated with each

connector used.

If there is continuity (0 ohms), the flex cable is seated correctly in the

connector.

If there is no continuity (infinite ohms), the flex cable is not seated

correctly. Repeat the flex cable attachment steps, and check the

continuity again.

(Note that there is also a self test named “Resource Bus Connection

Test” for verifying these connections when logic analyzer cards are

installed.)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 137 138

Žádné komentáře

Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Instalační příručka Strana 35