Agilent Technologies E4438C Uživatelská příručka stáhnout pdf (Strana 25)

User’s and Service Guide Supplement 17

E4438C Option HEC

Repeatable Triggering for Multiple Baseband Sources

ESG-C E4438C Option HEC “Slave” Instrument

Set the E4438C “Slave” as follows:

1. Select [Preset] > [Mode] > Dual ARB > Select Waveform. Using the arrow keys to

select RAMP_TEST_WRM on the display, then Select Waveform (*NONE*).

2. Select Trigger > Single.

Verify the following: Refer to Figure 12.

• Sample Clock: 100.000 MHz

• IQ Mod Filter: Through

• Ref Freq: 10.000 MHz (Int)

•Trig Type: Single

• Trig Source: Ext (Patt Trig In 1)

Figure 12 Display of the “Slave” settings

NOTE

If the settings are not the same as in Figure 12 proceed with the following:

Trigger (Single) > Trigger Setup > Trigger Source (EXT) > Ext >

Ext Source (PATT Trig IN 1) > [Return] > [Return] > [Return]

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 33 34

Žádné komentáře

Agilent Technologies E4438C Uživatelská příručka Strana 25