Agilent-technologies Wireless Network Optimization Platform E6474A Uživatelský manuál stáhnout pdf (Strana 36)

36 Agilent E6474A User’s Guide

3 Set Up Your System

To connect multiple E645xC receivers:

1 Attach one end of a short cable to the RX LOOP IN

connector on the master receiver. Attach the other end of

the short cable to the RX LOOP OUT of the second

receiver.

2 Continue to attach receivers (up to a total of four

receivers) as in step 1.

3 When all receivers are connected with short cables,

connect one end of a long cable to the RX LOOP OUT

connector on the master receiver to the RX LOOP IN on

the last receiver in the series.

4 Connect the serial port of your laptop to the RS- 232 port

of the master receiver with an RS- 232 null modem cable.

5 Connect the RF antenna to the RF input of each of the

receivers.

6 Connect the GPS antenna to the SMA GPS Connector of

the master receiver.

Refer to Figure 16 on page 37.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 193 194

Žádné komentáře

Agilent-technologies Wireless Network Optimization Platform E6474A Uživatelský manuál Strana 36