Agilent Technologies HP 8566B Uživatelský manuál stáhnout pdf (Strana 13)

Applied frequency Tuned frequency

(GHz) 0 to 2.5 2.0 to 5.8 5.8 to 12.5 12.5 to 18.6 18.6 to 22.0

0 to 2.5 NA -60 dBc 60 dBc -60 d8c -60 dBc

2.0 to 5.8 -60 dBc -70 dBc -60 dBc -60 dBc -60 dBc

5.8 to 1 2.5 -50 dBc -60 dBc -70 dBc -60 dBc -60 dBc

12.5 to 18.6 - 4 5 dBc -60dBc -60 dBc -70 dBc -60 dBc

18.6 to 22.0 -40 dBc -60 dBc -60 dBc -60dBc -70 dBc

Residual responses (signals displayed by the analyzer independent of input signals), 0 dB

input attenuation, no input signal.

100 Hz to 5.8 GHz < -100 dBm

5.8 to 12.5 GHz < -95 dBm

12.5 to 18.6 GHz < -85 dBm

18.6 to 22 GHz < -80 dBm

Gain compression < 1 .0 dB, 100 Hz to 22 GHz. with < -5 dBm at input mixer

Displayed average noise level (sensitivity)

0 dB input attenuation, 10 Hz RBW

100 Hz to 50 kHz < -95 dBm

50 kHz to 1 .0 MHz < -112 dBm

1 .0 MHz to 2.5 GHz < -134 dBm

2.0 to 5.8 GHz < -132 dBm

5.8 to 12.5 GHz < -125 dBm

12.5 to 18.6 GHz < -119 dBm

18.6 to 22 GHz < -114 dBm

Marker (frequency and amplitude are read out continuously)

Marker type Frequency accuracy

Normal Same as center frequency accuracy

Delta Same as frequency span accuracy

Amplitude accuracy

Normal Same as reference level accuracy + scale fidelity between the

reference level and marker position

Delta Same as frequency response uncertainty and scale fidelity

between two markers

Sweep time accuracy (1 µs to 1500s full sweep)

< 200 second sweep time ± 10%

> 200 second sweep time ± 30%

1. lmage responses: - 6 0 dBc, 18.6 – 20.0 GHz; – 50 dBc, 20.0 – 22 GHz

2. Limited by the appropriate DANL or -100 dBm, whichever is greater.

Figure 6. Specified average displayed noise level, 2.0 to 22 GHz,

preselected tuning range.

Figure 5. Specified average displayed noise level, 100 Hz to 2.5 GHz,

non-preselected tuning range.

Specifications (continued)

1 2 ... 8 9 10 11 12 13 14 15 16

Žádné komentáře

Agilent Technologies HP 8566B Uživatelský manuál Strana 13