Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Instalační příručka stáhnout pdf (Strana 130)

130

Chapter 9: Using the Pattern Generator

Start the Pattern Generator and View the Walking Ones Pattern

Start the Pattern Generator and View the

Walking Ones Pattern

When you select Run and Repetitive, the Pattern Generator begins to

run in repetitive mode. The output is the repeating "walking ones"

pattern. You will not see this output until you switch to the timing

analyzer waveform display.

The pattern generator will run independently until you stop it by

pressing the Stop key.

1 In the Pattern Generator window, right-click on Run, and select

Repetitive to set the pattern generator to run repetitively.

2 Click Run again to begin the repetitive run.

3 Click on the Setup window of the analyzer you are using.

4 Click the Run button.

The Timing analyzer runs a single trace and automatically displays the

Waveform 1 menu in which you see the "walking ones" pattern.

5 Click the Navigate button.

6 Select the slot with the analyzer you are using, and select

Waveform.

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 145 146

Žádné komentáře

Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Instalační příručka Strana 130