Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Instalační příručka Strana 21

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 150
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 20
21
Chapter 2: Connecting and Configuring Hardware
To configure an optional monitor for the 16702B
To configure an optional monitor for the 16702B
The internal LCD display is pre-configured for 800 x 600 at the factory. Use
this procedure if you wish to configure an external monitor or change the
monitor setting to a different resolution.
1 Connect your monitor to the logic analysis system as shown on page 18.
2 Turn on power to the monitor and then to the logic analysis system.
3 Immediately press the TAB key. Press once per second for
approximately 30 seconds. The display will change on the screen every
few seconds as the system cycles through the monitor resolution
choices.
1
2
Zobrazit stránku 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 149 150

Komentáře k této Příručce

Žádné komentáře