Agilent Technologies Weather Radio 1680 Uživatelský manuál stáhnout pdf (Strana 103)

103

Chapter 5: Troubleshooting

General Troubleshooting

This section includes troubleshooting procedures that can be done on either the

Agilent 1680A,AD- or 1690A,AD-series logic analyzers. Before any of these

procedures can be done on an Agilent 1690A,AD-series logic analyzer, the logic

analyzer must be connected to a host PC and both the host PC and the logic

analyzer must be turned on.

To run the self-tests

The Self Test menu checks the major hardware functions of the logic analyzer to

verify that it is working correctly. Self-tests can be performed all at once or one at

a time. Refer to Chapter 8 for more information on the logic analyzer self-tests.

CAUTION: Because the most recently acquired data will be lost, be sure to save important data

before running self tests.

1 Do the following steps for an Agilent 1690A,AD-series:

a Connect the logic analyzer to a host PC and apply power.

b Apply power to the host PC and allow the PC to finish booting.

2 For an Agilent 1680A,AD-series logic analyzer, apply power to the

instrument and allow it to finish booting.

3 Launch the Agilent Logic Analyzer application. When the application

launches, observe the status field and ensure it reads “Online.”

4 In the Agilent Logic Analyzer application, choose Help>Self Test... from

the main menu.

CAUTION: If you have acquired data, a warning message appears, "Running self-tests will invalidate

acquired data"; click OK to continue.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 173 174

Žádné komentáře

Agilent Technologies Weather Radio 1680 Uživatelský manuál Strana 103