Agilent Technologies Switch/Measure Uživatelská příručka stáhnout pdf (Strana 149)

Features and Functions 3

Agilent 34980A Mainframe User’s Guide 141

ABORt

DISPlay:TEXT '<string>'

OUTPut[:STATe] {OFF|0|ON|1}, (@<ch_list>)

ROUTe:CLOSe (@<ch_list>)

ROUTe:CLOSe:EXCLusive (@<ch_list>)

ROUTe:MODule:WAIT {1-8|SLOT1-SLOT8|ALL}

ROUTe:OPEN (@<ch_list>)

ROUTe:OPEN:ABUS [{1-4|ABUS1-ABUS4|ALL}]

ROUTe:OPEN:ALL [{1-8|SLOT1-SLOT8|ALL}]

ROUTe:SEQuence:TRIGger[:IMMediate] <name>

[SENSe:]TOTalize:CLEar:IMMediate (@<ch_list>)

SOURce:CURRent[:LEVel] {<current>|MIN|MAX|DEF}, (@<ch_list>)

SOURce:DIGital:DATA[:{BYTE|1|WORD|2|LWORd|4}] <data>,(@<ch_list>)

SOURce:DIGital:DATA:BIT {0|1}, <bit>, (@<ch_list>)

SOURce:FUNCtion:TRIGger:IMMediate (@<ch_list>)

SOURce:VOLTage[:LEVel] {<voltage>|MIN|MAX|DEF} , (@<ch_list>)

SYSTem:BEEPer

SYSTem:DELay[:IMMediate] <time>

• Sequences can be defined from the remote interface only. You can,

however, review, execute, and delete sequences from the front panel.

• When a sequence is defined, the specified commands are checked for

proper syntax and absolute parameter range limits. If an error is

detected during compilation, the entire sequence will be discarded.

During compilation, the sequence commands do not have to be valid for

the current instrument configuration; this allows you to define

sequences without regard to compatibility with the current set of

installed modules. More extensive error checking, such as channel range

expansion and validation, is performed when the sequence is executed.

• If you define a sequence with a name already in use by another

sequence, the new definition will overwrite the previous definition 

(no error is generated).

• A sequence name can contain up to 30 characters. The first character

must be a letter (A- Z), but the remaining 29 characters can be letters,

numbers (0- 9), or an underscore ( _ ). Blank spaces are not allowed.

• When stored in memory, the user- defined sequence names are

converted to all uppercase letters. For example, when stored “MySeq_1”

is converted to “MYSEQ_1”.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 183 184

Žádné komentáře

Agilent Technologies Switch/Measure Uživatelská příručka Strana 149