Agilent Technologies Switch/Measure Uživatelská příručka stáhnout pdf (Strana 56)

48 Agilent 34980A Mainframe User’s Guide

2 Getting Started

Press EXIT MENU, which saves any changes and defaults all other

parameters in the Utility menu.

5 Wait for the DHCP server to assign a valid address; this operation can

take between 30 seconds and one minute to complete).

6 From the Utility menu (see Navigation Flow Diagram on page 47),

navigate to the LAN SETTINGS choice and select VIEW. Using the

flow diagram as a guide, view the instrument's IP address and other

LAN settings. Write down the IP address in the space below:

34980A IP Address: ___________________________

7 Press EXIT MENU.

8 Now you can use the integrated 34980A Web Browser Interface to

access and control the instrument. See “Launching the Web Interface”

on page 54 for more information.

9 If you plan to program the instrument over LAN using other software:

• Make sure you have installed the required I/O software on your

computer.

• If you will be using the Agilent IO Libraries Suite, use its

Connection Expert utility to add the 34980A and verify a

connection. When identifying the instrument, it is easiest if you use

the IP address noted in step 6 above.

• For an overview on programming instruments via LAN, refer to the

Connectivity Guide.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 183 184

Žádné komentáře

Agilent Technologies Switch/Measure Uživatelská příručka Strana 56