
6
Pulse Source Supplemental Characteristics
Minimum programmable pulse width: 50 μs
Pulse width programming resolution: 1 μs
Pulse width definition:
The time from 10 % leading to 90 % trailing edge as follows.
Pulsed DC
Max
Voltage
Max Peak
Current
Max Base
Current
Pulse Width Max Duty Cycle Max
Voltage
Max
Current
DC or
pulsed
210 V 0.105 A 0.105 A 50 μs to 99999.9 s 99.9999 % 210 V 0.105 A
21 V 1.515 A
1
1.515 A
1
50 μs to 99999.9 s 99.9999 % 21 V 1.515 A
1
6 V 3.03 A
1
3.03 A
1
50 μs to 99999.9 s 99.9999 % 6 V 3.03 A
1
Pulsed only
200 V 1.515 A 50 mA 50 μs to 2.5 ms 2.5 %
180 V 1.05 A 50 mA 50 μs to 10 ms 2.5 %
6 V 10.5 A 0.5 A 50 μs to 1 ms 2.5 %
1. Max current limitation: For 21 V/1.515 A and 6 V / 3.03 A ranges, total max current is limited by the table in page 3 for using
2 channels. Max current is not limited for using 1 channel only.
Source Value Limit Value Load Source Settling
(% of range)
Min Pulse
Width
200 V 1.5 A 200 Ω 0.1 % 1 ms
6 V 10.5 A 0.6 Ω 0.1 % 0.2 ms
1.5 A 200 V 65 Ω 0.1 % 2.5 ms
10.5 A 6 V 0.5 Ω 0.1 % 0.2 ms
Maximum pulse width and duty cycle:
Minimum pulse width at the given voltage, current and settling conditions:
90%
Peak level
Base level
Pulse width
10%
Komentáře k této Příručce