Agilent Technologies ENA Series Manuál s instrukcemi Strana 182

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 251
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 181
182 Chapter 6
Replacement Procedure
Fan Replacement
Fan Replacement
Tools Required
TORX screwdriver, T15 and T20
Flat edge screwdriver
A fine stick such as Hex key, 1.5 mm
Removal Procedure
Refer to Figure 6-11 for this procedure.
Step 1. Remove the outer cover as described in “Outer Cover Removal” on page 166.
Step 2. Remove the front panel as described in “Front Panel Removal” on page 167.
Step 3. Disconnect the fan cable (item 1) from the A21 PCI DSP Card.
Step 4. Remove the four rivets (plastic) fastening the fan.
Figure 6-11 Fan Removal
Replacement Procedure
Step 1. Reverse the order of the removal procedure.
Zobrazit stránku 181
1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 250 251

Komentáře k této Příručce

Žádné komentáře