Agilent Technologies 2000 X-Series Servisní příručka Strana 728

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 930
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 727
728 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
33 Obsolete and Discontinued Commands
:MEASure:THResholds
(see page 790)
Command Syntax
:MEASure:THResholds {T1090 | T2080 | VOLTage}
The :MEASure:THResholds command selects the thresholds used when
making time measurements.
Query Syntax
:MEASure:THResholds?
The :MEASure:THResholds? query returns the current thresholds selected
when making time measurements.
Return Format
{T1090 | T2080 | VOLTage}<NL>
{T1090} uses the 10% and 90% levels of the selected waveform.
{T2080} uses the 20% and 80% levels of the selected waveform.
{VOLTage} uses the upper and lower voltage thresholds set by the
UPPer and LOWer commands on the selected waveform.
See Also "Introduction to :MEASure Commands" on page 340
":MEASure:LOWer" on page 725
":MEASure:UPPer" on page 733
NOTE
The :MEASure:THResholds command is obsolete and is provided for backward
compatibility to previous oscilloscopes. Use the :MEASure:DEFine THResholds command
(see page 344) instead.
Zobrazit stránku 727
1 2 ... 723 724 725 726 727 728 729 730 731 732 733 ... 929 930

Komentáře k této Příručce

Žádné komentáře