Agilent Technologies E5071C Uživatelská příručka Strana 484
- Strana / 551
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
484 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:TRIG
Syntax :TRIGger[:SEQuence][:IMMediate]
Description Regardless of the setting of the trigger mode, generates a trigger immediately and executes
a measurement.
There is the following difference from the trigger with the :TRIG:SING command.
• The execution of the command finishes at the time of a trigger.
If you execute this command when the trigger system is not in the trigger wait state (trigger
event detection state), an error occurs and the command is ignored.
For details about the trigger system, refer to “Trigger system” on page 80. (No query)
Example of use
10 OUTPUT 717;":TRIG"
Related commands :TRIG:SING on page 484
Equivalent key No equivalent key is available on the front panel.
:TRIG:SING
Syntax :TRIGger[:SEQuence]:SINGle
Description Regardless of the setting of the trigger mode, generates a trigger immediately and executes
a measurement.
There is the following difference from the trigger with the :TRIG command.
• The execution of the command finishes when the measurement (all sweeps) initiated
with this command finishes. In other words, you can wait for the end of the
measurement using the *OPC? command.
If you execute this command when the trigger system is not in the trigger wait state (trigger
event detection state), an error occurs and the command is ignored.
For details about the trigger system, refer to “Trigger system” on page 80. (No query)
Example of use
10 OUTPUT 717;":TRIG:SING"
20 OUTPUT 717;"*OPC?"
30 ENTER 717;A
Related commands :TRIG on page 484
*OPC? on page 198
Equivalent key No equivalent key is available on the front panel.
- Programmer’s Guide 1
- Manual Printing History 2
- Typeface Conventions 3
- Sample Program Disk 3
- Documentation Map 4
- Contents 10
- Contents of This Manual 18
- How To Use This Manual 20
- Using sample programs 21
- 22 Chapter 1 22
- 2 Overview of Remote Control 23
- 24 Chapter 2 24
- Overview of Remote Control 24
- GPIB remote control system 25
- Device selector 26
- LAN remote control system 27
- Control over SICL-LAN server 28
- OK as LAN has been selected 29
- This host. The Select 31
- 32 Chapter 2 32
- Control over telnet server 33
- Grammar of messages 37
- Remote mode 38
- 3 Setting Up the Analyzer 39
- Setting the Number of Traces 41
- Setting the System Z0 43
- Configuring Display Settings 44
- Chapter 3 45 45
- Setting Up the Analyzer 45
- 3. Setting Up the Analyzer 45
- Setting display colors 50
- Chapter 3 53 53
- 56 Chapter 3 56
- Chapter 3 57 57
- 58 Chapter 3 58
- 4 Performing a Calibration 59
- Calibration 60
- Calibration type Command 62
- Defining Calibration Kits 64
- Chapter 4 71 71
- Performing a Calibration 71
- 4. Performing a Calibration 71
- 72 Chapter 4 72
- Chapter 4 73 73
- 74 Chapter 4 74
- Chapter 4 77 77
- Example 4-2 ECal (ecal.htb) 77
- 78 Chapter 4 78
- 5 Making a Measurement 79
- Trigger system 80
- Measurement 83
- Using the Status Register 84
- 86 Chapter 5 86
- Making a Measurement 86
- Using the :TRIG:SING Command 87
- Using Wait Time 88
- 6Analyzing Data 89
- Showing/Hiding Markers 90
- Using Marker Search 91
- Using the Analysis Command 93
- 96 Chapter 6 96
- Bandwidth Search 97
- Notch search 99
- Statistical Analysis 100
- Analyzing impedance 101
- 102 Chapter 6 102
- Analyzing Data 102
- Data Transfer Format 104
- ASCII Transfer Format 105
- Binary Transfer Format 106
- Internal data processing 108
- 112 Chapter 7 112
- 114 Chapter 7 114
- Entering Data into a Trace 115
- 116 Chapter 7 116
- 118 Chapter 7 118
- 8 Limit Test 119
- Performing a Limit Test 120
- Obtaining Test Results 121
- Test Results for Each Channel 122
- Chapter 8 123 123
- Limit Test 123
- 8. Limit Test 123
- Overall Test Result 124
- Sample Program 125
- 128 Chapter 8 128
- Chapter 8 129 129
- 130 Chapter 8 130
- 9. Saving and Recalling 131
- (File Management) 131
- Saving and Recalling File 132
- Saving measurement data 133
- Chapter 9 135 135
- (File Management) 135
- Sample program 136
- 138 Chapter 9 138
- Managing Files 139
- 144 Chapter 9 144
- Chapter 9 145 145
- 146 Chapter 9 146
- Agilent E5061A/E5062A 147
- Handler I/O Port Overview 148
- 150 Chapter 10 150
- Chapter 10 151 151
- Inputting/Outputting Data 152
- Reading data input to port 153
- Data output to port 153
- Preset states at power-on 154
- Timing Chart 155
- Electrical Characteristics 158
- Output signal 159
- Power supply (+5 V) 159
- 11. Working with Automatic 161
- Test Systems 161
- (Key Lock Feature) 162
- Using the error queue 166
- 168 Chapter 11 168
- 12. Sample Application 169
- Programs 169
- E5061A/E5062A 170
- [Enter] to 172
- 174 Chapter 12 174
- Sample Application Programs 174
- Chapter 12 175 175
- Using VBA macro 176
- E5061A/E5062A whose IP 178
- ErrHandler: 181
- Call siclcleanup 181
- 186 Chapter 12 186
- WinSock API and its socket 188
- 13 SCPI Command Reference 193
- Description 194
- Parameters 195
- Query response 195
- Related commands 195
- Equivalent key 195
- IEEE Common Commands 196
- 30 ENTER 717;A 197
- 20 ENTER 717;A 197
- 20 ENTER 717;A$ 199
- E5061A/E5062A commands 202
- :CALC{1-4}:BLIM 203
- :CALC{1-4}:BLIM:DB 204
- :CALC{1-4}:BLIM:DISP:MARK 205
- :CALC{1-4}:BLIM:DISP:VAL 206
- :CALC{1-4}:BLIM:FAIL? 207
- :CALC{1-4}:BLIM:MAX 208
- :CALC{1-4}:BLIM:MIN 209
- :CALC{1-4}:BLIM:REP? 210
- :CALC{1-4}:CONV 211
- :CALC{1-4}:CONV:FUNC 212
- :CALC{1-4}:CORR:EDEL:TIME 213
- :CALC{1-4}:CORR:OFFS:PHAS 214
- :CALC{1-4}:DATA:FDAT 215
- :CALC{1-4}:DATA:FMEM 216
- :CALC{1-4}:DATA:SDAT 217
- :CALC{1-4}:DATA:SMEM 218
- :CALC{1-4}:FORM 219
- 220 Chapter 13 220
- SCPI Command Reference 220
- :CALC{1-4}:FUNC:DATA? 221
- :CALC{1-4}:FUNC:DOM 222
- :CALC{1-4}:FUNC:DOM:COUP 223
- :CALC{1-4}:FUNC:DOM:STAR 224
- :CALC{1-4}:FUNC:DOM:STOP 225
- :CALC{1-4}:FUNC:EXEC 225
- :CALC{1-4}:FUNC:PEXC 226
- :CALC{1-4}:FUNC:POIN? 227
- :CALC{1-4}:FUNC:PPOL 228
- :CALC{1-4}:FUNC:TARG 229
- :CALC{1-4}:FUNC:TTR 230
- :CALC{1-4}:FUNC:TYPE 231
- :CALC{1-4}:LIM 232
- :CALC{1-4}:LIM:DATA 233
- 234 Chapter 13 234
- :CALC{1-4}:LIM:DISP 235
- :CALC{1-4}:LIM:DISP:CLIP 236
- :CALC{1-4}:LIM:FAIL? 237
- :CALC{1-4}:LIM:OFFS:AMPL 238
- :CALC{1-4}:LIM:OFFS:MARK 239
- :CALC{1-4}:LIM:OFFS:STIM 240
- :CALC{1-4}:LIM:REP:ALL? 241
- :CALC{1-4}:LIM:REP? 242
- :CALC{1-4}:LIM:REP:POIN? 242
- :CALC{1-4}:MARK:BWID 243
- :CALC{1-4}:MARK:COUP 244
- :CALC{1-4}:MARK:FUNC:DOM 245
- :CALC{1-4}:MARK:FUNC:DOM:COUP 246
- :CALC{1-4}:MARK:FUNC:DOM:STAR 247
- :CALC{1-4}:MARK:FUNC:DOM:STOP 248
- 30 ENTER 717;A$ 250
- [Marker Search] - Tracking 252
- :CALC{1-4}:MARK:FUNC:MULT:TTR 253
- :CALC{1-4}:MARK:MATH:FLAT 255
- 20 ENTER 717;A,B,C,D 256
- :CALC{1-4}:MARK:MATH:FST 257
- 20 ENTER 717;A,B,C 258
- :CALC{1-4}:MARK:MATH:STAT 259
- :CALC{1-4}:MARK:NOTC 261
- :CALC{1-4}:MARK:REF 262
- :CALC{1-4}:MARK{1-10} 263
- :CALC{1-4}:MARK{1-10}:ACT 264
- :CALC{1-4}:MARK{1-10}:DISC 267
- [Marker Search] - Max 268
- [Marker Search] - Notch Value 277
- :CALC{1-4}:MARK{1-10}:SET 278
- :CALC{1-4}:MARK{1-10}:X 279
- :CALC{1-4}:MARK{1-10}:Y? 280
- :CALC{1-4}:MATH:FUNC 281
- :CALC{1-4}:MATH:MEM 281
- :CALC{1-4}:MST 282
- :CALC{1-4}:MST:DATA? 283
- :CALC{1-4}:PAR:COUN 284
- :CALC{1-4}:PAR{1-4}:DEF 285
- :CALC{1-4}:PAR{1-4}:SEL 286
- :CALC{1-4}:RLIM 286
- :CALC{1-4}:RLIM:DATA 287
- :CALC{1-4}:RLIM:DISP:LINE 288
- :CALC{1-4}:RLIM:DISP:SEL 289
- :CALC{1-4}:RLIM:DISP:VAL 290
- :CALC{1-4}:RLIM:FAIL? 291
- :CALC{1-4}:RLIM:REP? 292
- :CALC{1-4}:SMO 293
- :CALC{1-4}:SMO:APER 294
- :CONT:HAND:A 295
- :CONT:HAND:B 295
- :CONT:HAND:C 296
- :CONT:HAND:C:MODE 297
- :CONT:HAND:D 298
- :CONT:HAND:D:MODE 299
- :CONT:HAND:E 300
- :CONT:HAND:F 301
- :CONT:HAND:IND:STAT 302
- :CONT:HAND:OUTP{1-2} 302
- :CONT:HAND:RTR:STAT 303
- :DISP:ANN:FREQ 304
- :DISP:CCL 304
- :DISP:CLOC 305
- :DISP:COL{1-2}:BACK 306
- :DISP:COL{1-2}:GRAT{1-2} 307
- :DISP:COL{1-2}:LIM{1-2} 308
- :DISP:COL{1-2}:RES 308
- :DISP:COL{1-2}:TRAC{1-4}:DATA 309
- :DISP:COL{1-2}:TRAC{1-4}:MEM 310
- :DISP:ECHO 311
- :DISP:ECHO:CLE 311
- :DISP:ENAB 312
- :DISP:FSIG 313
- :DISP:IMAG 313
- :DISP:MAX 314
- :DISP:SKEY 314
- :DISP:SPL 315
- :DISP:TABL 316
- :DISP:TABL:TYPE 317
- :DISP:UPD 318
- :DISP:WIND{1-4}:ACT 318
- :DISP:WIND{1-4}:ANN:MARK:ALIG 319
- :DISP:WIND{1-4}:ANN:MARK:SING 320
- :DISP:WIND{1-4}:LAB 321
- :DISP:WIND{1-4}:MAX 322
- :DISP:WIND{1-4}:SPL 323
- :DISP:WIND{1-4}:TITL 324
- :DISP:WIND{1-4}:TITL:DATA 324
- [Display] - Graticule Label 327
- :DISP:WIND{1-4}:TRAC{1-4}:MEM 328
- [Scale] - Scale/Div 330
- [Scale] - Reference Value 331
- :DISP:WIND{1-4}:X:SPAC 335
- :DISP:WIND{1-4}:Y:DIV 336
- :FORM:BORD 337
- :FORM:DATA 338
- :HCOP:ABOR 339
- :HCOP:IMAG 339
- :INIT{1-4} 340
- :INIT{1-4}:CONT 341
- :MMEM:CAT? 342
- :MMEM:COPY 343
- :MMEM:DEL 344
- :MMEM:LOAD 345
- :MMEM:LOAD:CHAN 346
- :MMEM:LOAD:CHAN:COEF 347
- :MMEM:LOAD:LIM 348
- :MMEM:LOAD:PROG 349
- :MMEM:LOAD:RLIM 350
- :MMEM:LOAD:SEGM 351
- :MMEM:MDIR 352
- :MMEM:STOR 353
- :MMEM:STOR:CHAN 354
- :MMEM:STOR:CHAN:CLE 354
- :MMEM:STOR:CHAN:COEF 355
- :MMEM:STOR:FDAT 356
- :MMEM:STOR:IMAG 357
- :MMEM:STOR:LIM 358
- :MMEM:STOR:PROG 359
- :MMEM:STOR:RLIM 360
- :MMEM:STOR:SALL 361
- :MMEM:STOR:SEGM 362
- :MMEM:STOR:STYP 363
- :MMEM:TRAN 364
- :PROG:CAT? 365
- :PROG:NAME 366
- :PROG:STAT 367
- :SENS:CORR:COLL:ECAL:PATH? 368
- :SENS:CORR:IMP 369
- :SENS{1-4}:AVER:CLE 370
- :SENS{1-4}:AVER 370
- :SENS{1-4}:AVER:COUN 371
- :SENS{1-4}:BAND 372
- :SENS{1-4}:BWID 373
- :SENS{1-4}:CORR:CLE 373
- :SENS{1-4}:CORR:COEF? 374
- :SENS{1-4}:CORR:COLL:CKIT 375
- :SENS{1-4}:CORR:COLL:CKIT:LAB 376
- :SENS{1-4}:CORR:COLL:CKIT:RES 380
- 396 Chapter 13 396
- :SENS{1-4}:CORR:COLL:ISOL 399
- :SENS{1-4}:CORR:COLL:LOAD 401
- :SENS{1-4}:CORR:COLL:OPEN 406
- :SENS{1-4}:CORR:COLL:SAVE 407
- :SENS{1-4}:CORR:COLL:SHOR 407
- :SENS{1-4}:CORR:COLL:THRU 408
- :SENS{1-4}:CORR:EXT 409
- :SENS{1-4}:CORR:EXT:PORT{1-2} 410
- :SENS{1-4}:CORR:PROP 411
- :SENS{1-4}:CORR:RVEL:COAX 411
- :SENS{1-4}:CORR:STAT 412
- :SENS{1-4}:CORR:TYPE{1-4}? 413
- :SENS{1-4}:FREQ 414
- :SENS{1-4}:FREQ:CENT 415
- :SENS{1-4}:FREQ:DATA? 416
- :SENS{1-4}:FREQ:SPAN 417
- :SENS{1-4}:FREQ:STAR 418
- :SENS{1-4}:FREQ:STOP 419
- :SENS{1-4}:ROSC:SOUR? 420
- :SENS{1-4}:SEGM:DATA 421
- :SENS{1-4}:SEGM:SWE:POIN? 423
- :SENS{1-4}:SEGM:SWE:TIME? 423
- :SENS{1-4}:SWE:DEL 424
- :SENS{1-4}:SWE:POIN 425
- :SENS{1-4}:SWE:TIME 426
- :SENS{1-4}:SWE:TIME:AUTO 427
- :SENS{1-4}:SWE:TYPE 428
- :SERV:CHAN:ACT? 428
- :SERV:CHAN:COUN? 429
- :SERV:CHAN{1-4}:TRAC:ACT? 429
- :SERV:CHAN:TRAC:COUN? 429
- :SERV:PORT:COUN? 430
- :SOUR{1-4}:POW 431
- :SOUR{1-4}:POW:ATT 432
- :SOUR{1-4}:POW:CENT 433
- :SOUR{1-4}:POW:PORT:COUP 434
- :SOUR{1-4}:POW:PORT{1-2} 435
- :SOUR{1-4}:POW:SLOP 436
- :SOUR{1-4}:POW:SLOP:STAT 437
- :SOUR{1-4}:POW:SPAN 438
- :SOUR{1-4}:POW:STAR 439
- :SOUR{1-4}:POW:STOP 440
- :STAT:OPER? 441
- :STAT:OPER:COND? 441
- :STAT:OPER:ENAB 442
- :STAT:OPER:NTR 443
- :STAT:OPER:PTR 444
- :STAT:PRES 445
- :STAT:QUES? 445
- :STAT:QUES:BLIM? 445
- :STAT:QUES:BLIM:CHAN{1-4}? 446
- :STAT:QUES:BLIM:CHAN{1-4}:NTR 448
- :STAT:QUES:BLIM:CHAN{1-4}:PTR 449
- :STAT:QUES:BLIM:COND? 449
- :STAT:QUES:BLIM:ENAB 450
- :STAT:QUES:BLIM:NTR 451
- :STAT:QUES:BLIM:PTR 452
- :STAT:QUES:COND? 453
- :STAT:QUES:ENAB 454
- :STAT:QUES:LIM? 455
- :STAT:QUES:LIM:CHAN{1-4}? 455
- :STAT:QUES:LIM:CHAN{1-4}:ENAB 456
- :STAT:QUES:LIM:CHAN{1-4}:NTR 457
- :STAT:QUES:LIM:CHAN{1-4}:PTR 458
- :STAT:QUES:LIM:COND? 459
- :STAT:QUES:LIM:ENAB 460
- :STAT:QUES:LIM:NTR 461
- :STAT:QUES:LIM:PTR 462
- :STAT:QUES:NTR 463
- :STAT:QUES:PTR 464
- :STAT:QUES:RLIM? 465
- :STAT:QUES:RLIM:CHAN{1-4}? 465
- :STAT:QUES:RLIM:CHAN{1-4}:NTR 467
- :STAT:QUES:RLIM:CHAN{1-4}:PTR 468
- :STAT:QUES:RLIM:COND? 468
- :STAT:QUES:RLIM:ENAB 469
- :STAT:QUES:RLIM:NTR 470
- :STAT:QUES:RLIM:PTR 471
- :SYST:BACK 472
- :SYST:BEEP:COMP:IMM 473
- :SYST:BEEP:COMP:STAT 473
- :SYST:BEEP:WARN:IMM 474
- :SYST:BEEP:WARN:STAT 474
- :SYST:DATE 475
- :SYST:ERR? 476
- :SYST:KLOC:KBD 477
- :SYST:KLOC:MOUS 478
- :SYST:POFF 479
- :SYST:PRES 479
- :SYST:SEC:LEV 480
- :SYST:SERV? 481
- :SYST:TIME 482
- :SYST:UPR 483
- :TRIG:SING 484
- :TRIG:SOUR 485
- Command list 486
- Command tree 486
- 488 Chapter 13 488
- Command Parameters Note 488
- 490 Chapter 13 490
- 492 Chapter 13 492
- 494 Chapter 13 494
- 496 Chapter 13 496
- 498 Chapter 13 498
- A Manual Changes 499
- Manual Changes 500
- Change 3 501
- Change 2 501
- Change 1 502
- 504 Appendix A 504
- B Status Reporting System 505
- General Status Register Model 506
- Event Register 507
- Enable Register 507
- Status Byte Register 507
- Status Register Structure 509
- 510 Appendix B 510
- Status Reporting System 510
- 512 Appendix B 512
- Appendix B 513 513
- B. Status Reporting System 513
- 514 Appendix B 514
- Appendix B 515 515
- 516 Appendix B 516
- Appendix B 517 517
- 518 Appendix B 518
- Appendix B 519 519
- Register 521
- C Error Messages 525
- Error Messages 526
- Warning Message 536
- 538 Appendix C 538
- Error number: 538
- Index 539 539
- 540 Index 540
- Index 541 541
- 542 Index 542
- Index 543 543
- 544 Index 544
- Index 545 545
- 546 Index 546
- Index 547 547
- 548 Index 548
- Index 549 549
- 550 Index 550
Komentáře k této Příručce
Související produkty a manuály pro Software Agilent Technologies E5071C
Software Agilent Technologies FS2010 Servisní příručka
(396 stránky)
(396 stránky)
Software Agilent Technologies VEE Pro Specifikace
(16 stránky)
(16 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.103 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
urenrjrjkvnm