Agilent Technologies 8935 Series Uživatelský manuál stáhnout pdf (Strana 263)

Chapter 8 263

IBASIC Controller

Uploading Programs from the Test Set to a PC

As an overview, the following steps must be performed:

1. The Test Set must output the program over Serial Port 9.

2. The PC must receive the data through its serial port and direct the

data to a file on disk. This can be done by a terminal emulator

program such as HyperTerminal or ProComm. This requires having

the serial port connection established as outlined in “Interfacing to

the IBASIC Controller using Serial Ports” on page 230.

To configure the Test Set to output the program to Serial Port 9 position

the cursor on the IBASIC Command Line field. Execute the command

PRINTER IS 9. This command sets Serial Port 9 as the default printer

port. When PRINT commands are executed, ASCII characters will be

sent to Serial Port 9.

On the PC, select Receive Text File in HyperTerminal or Receive

Files (PgDn which is called Download) in ProComm. Enter a file name,

then initiate the file transfer. The PC is now looking for ASCII text to

come in the serial port.

Load the program to be transferred into the Test Set. Execute the

IBASIC LIST command on the IBASIC Command Line. The program

listing will be sent to Serial Port 9 and be received by the terminal

emulator software on the PC. When the listing is finished, terminate

the file transfer by selecting Stop on Windows or Escape on ProComm.

1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 328 329

Žádné komentáře

Agilent Technologies 8935 Series Uživatelský manuál Strana 263