
170 1100 Series DAD and MWD Reference Manual
4 Repairing the Detector
Replacing Status Light Pipe
When required If part was broken or removed
Tools required Screwdriver POZI 1 PT3
Parts required Status light pipe 5041-8384
Preparations for this procedure:
• Remove the front cover and top cover, see “Removing
the Top Cover and Foam” on page 140.
1 The status light pipe is clipped into the top cover.
Next steps:
• Replace the top cover, see “Replacing the Foam and the Top Cover” on page 175.
• Replace the detector into the stack and reconnect the cables and capillaries.
• Turn on the detector.
Komentáře k této Příručce