Agilent Technologies InfiniiVision 3000 DSO-X 3054A Servisní příručka Strana 717
- Strana / 970
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
:WAVeform Commands 29
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 717
:WAVeform:DATA
(see page 860)
Query Syntax
:WAVeform:DATA?
The :WAVeform:DATA query returns the binary block of sampled data
points transmitted using the IEEE 488.2 arbitrary block data format. The
binary data is formatted according to the settings of the
:WAVeform:UNSigned, :WAVeform:BYTeorder, :WAVeform:FORMat, and
:WAVeform:SOURce commands. The number of points returned is
controlled by the :WAVeform:POINts command.
In BYTE or WORD waveform formats, these data values have special
meaning:
• 0x00 or 0x0000 — Hole. Holes are locations where data has not yet been
acquired.
Another situation where there can be zeros in the data, incorrectly, is
when programming over telnet port 5024. Port 5024 provides a
command prompt and is intended for ASCII transfers. Use telnet port
5025 instead.
• 0x01 or 0x0001 — Clipped low. These are locations where the waveform
is clipped at the bottom of the oscilloscope display.
• 0xFF or 0xFFFF — Clipped high. These are locations where the
waveform is clipped at the top of the oscilloscope display.
Return Format
<binary block data><NL>
See Also • For a more detailed description of the data returned for different
acquisition types, see: "Introduction to :WAVeform Commands" on
page 709
• ":WAVeform:UNSigned" on page 735
• ":WAVeform:BYTeorder" on page 715
• ":WAVeform:FORMat" on page 719
• ":WAVeform:POINts" on page 720
• ":WAVeform:PREamble" on page 724
• ":WAVeform:SOURce" on page 729
• ":WAVeform:TYPE" on page 734
Example Code
' QUERY_WAVE_DATA - Outputs waveform data that is stored in a buffer.
' Query the oscilloscope for the waveform data.
myScope.WriteString ":WAV:DATA?"
' READ_WAVE_DATA - The wave data consists of two parts: the header,
' and the actual waveform data followed by a new line (NL) character.
' The query data has the following format:
- Agilent InfiniiVision 1
- 3000 X-Series 1
- Oscilloscopes 1
- In This Book 3
- Contents 7
- 10 :CHANnel<n> Commands 10
- 11 :DEMO Commands 10
- 12 :DIGital<d> Commands 10
- 13 :DISPlay Commands 10
- 15 :FUNCtion Commands 11
- 16 :HARDcopy Commands 11
- 14 :EXTernal Trigger Commands 11
- 17 :LISTer Commands 12
- 18 :MARKer Commands 12
- 19 :MEASure Commands 12
- 20 :MTESt Commands 13
- 21 :POD Commands 14
- 22 :RECall Commands 14
- 23 :SAVE Commands 14
- 24 :SBUS<n> Commands 15
- 25 :SEARch Commands 17
- 26 :SYSTem Commands 18
- 27 :TIMebase Commands 19
- 28 :TRIGger Commands 19
- 29 :WAVeform Commands 21
- 30 :WGEN Commands 21
- 31 :WMEMory<r> Commands 21
- 33 Error Messages 23
- 34 Status Reporting 23
- 35 Synchronizing Acquisitions 23
- 37 Programming Examples 24
- What's New 25
- 1 What's New 26
- Version 1.00 at Introduction 27
- Obsolete 31
- Commands 31
- Discontinued 31
- Setting Up 33
- 2 Setting Up 34
- Using the LAN Interface 35
- Using the GPIB Interface 36
- Setting Up 2 37
- Address 39
- Click Test Connection 39
- Getting Started 43
- Initializing 44
- Capturing Data 44
- Analyzing Captured Data 45
- Programming the Oscilloscope 46
- 3 Getting Started 48
- Getting Started 3 49
- Ensure New Data is Collected 50
- Checking Instrument Status 54
- Telnet Sockets 55
- Commands Quick Reference 57
- Command Summary 58
- 4 Commands Quick Reference 100
- NR3 format 119
- Syntax Elements 121
- Commands Quick Reference 4 123
- Common (*) Commands 125
- 5 Common (*) Commands 126
- *CLS (Clear Status) 129
- Common (*) Commands 5 131
- *IDN (Identification Number) 134
- *LRN (Learn Device Setup) 135
- *OPC (Operation Complete) 136
- *OPT (Option Identification) 137
- *RCL (Recall) 139
- *RST (Reset) 140
- *SAV (Save) 143
- *SRE (Service Request Enable) 144
- <mask><NL> 145
- *STB (Read Status Byte) 146
- *TRG (Trigger) 148
- *TST (Self Test) 149
- *WAI (Wait To Continue) 150
- Root (:) Commands 151
- 6 Root (:) Commands 152
- :ACTivity 155
- :AER (Arm Event Register) 156
- :AUToscale 157
- :AUToscale:AMODE 159
- :AUToscale:CHANnels 160
- :AUToscale:FDEBug 161
- :DIGitize 163
- :MTEenable <mask> 165
- :MTEenable? 165
- <value><NL> 165
- :MTERegister[:EVENt]? 167
- :OPEE <mask> 169
- :OPERegister:CONDition? 171
- :OPERegister[:EVENt]? 173
- :OVLRegister? 177
- Root (:) Commands 6 179
- (see page 860) 181
- Query Syntax 181
- Return Format: 181
- :TER (Trigger Event Register) 185
- :ACQuire Commands 187
- 7 :ACQuire Commands 188
- :ACQuire:COMPlete 189
- :ACQuire:COUNt 190
- :ACQuire:MODE 191
- :ACQuire:POINts 192
- :ACQuire:SEGMented:ANALyze 193
- :ACQuire:SEGMented:COUNt 194
- :ACQuire:SEGMented:INDex 195
- :ACQuire Commands 7 197
- :ACQuire:SRATe 198
- :ACQuire:TYPE 199
- :BUS<n> Commands 201
- 8 :BUS<n> Commands 202
- :BUS<n>:BIT<m> 203
- :BUS<n>:BITS 204
- :BUS<n> Commands 8 205
- :BUS<n>:CLEar 206
- :BUS<n>:DISPlay 207
- :BUS<n>:LABel 208
- :BUS<n>:MASK 209
- :CALibrate Commands 211
- 9 :CALibrate Commands 212
- :CALibrate:DATE 213
- :CALibrate:LABel 214
- :CALibrate:OUTPut 215
- :CALibrate:PROTected 216
- :CALibrate:STARt 217
- :CALibrate:STATus 218
- :CALibrate:TEMPerature 219
- :CALibrate:TIME 220
- :CHANnel<n> Commands 221
- :CHANnel<n> Commands 10 223
- :CHANnel<n>:BWLimit 224
- :CHANnel<n>:COUPling 225
- :CHANnel<n>:DISPlay 226
- :CHANnel<n>:IMPedance 227
- :CHANnel<n>:INVert 228
- :CHANnel<n>:LABel 229
- :CHANnel<n>:OFFSet 230
- :CHANnel<n>:PROBe 231
- :CHANnel<n>:PROBe:ID 233
- :CHANnel<n>:PROBe:SKEW 234
- :CHANnel<n>:PROBe:STYPe 235
- :CHANnel<n>:PROTection 236
- :CHANnel<n>:RANGe 237
- :CHANnel<n>:SCALe 238
- :CHANnel<n>:UNITs 239
- :CHANnel<n>:VERNier 240
- :DEMO Commands 241
- :DEMO:FUNCtion 242
- Demo Signal 244
- :DEMO:FUNCtion:PHASe:PHASe 245
- :DEMO:OUTPut 246
- :DIGital<d> Commands 247
- :DIGital<d>:DISPlay 249
- :DIGital<d>:LABel 250
- :DIGital<d>:POSition 251
- :DIGital<d>:SIZE 252
- :DIGital<d>:THReshold 253
- :DISPlay Commands 255
- :DISPlay:CLEar 257
- :DISPlay:DATA 258
- :DISPlay:LABel 259
- :DISPlay:LABList 260
- :DISPlay:PERSistence 261
- :DISPlay:VECTors 262
- :EXTernal Trigger Commands 263
- :EXTernal:BWLimit 264
- :EXTernal:PROBe 265
- :EXTernal:RANGe 266
- :EXTernal:UNITs 267
- :FUNCtion Commands 269
- :FUNCtion Commands 15 271
- :FUNCtion:CENTer 272
- :FUNCtion:DISPlay 273
- :FUNCtion:GOFT:OPERation 274
- :FUNCtion:GOFT:SOURce1 275
- :FUNCtion:GOFT:SOURce2 276
- :FUNCtion:OFFSet 277
- :FUNCtion:OPERation 278
- :FUNCtion:RANGe 279
- :FUNCtion:REFerence 280
- :FUNCtion:SCALe 281
- :FUNCtion:SOURce1 282
- :FUNCtion:SOURce2 283
- :FUNCtion:SPAN 284
- :FUNCtion:WINDow 285
- :HARDcopy Commands 287
- :HARDcopy:AREA 289
- :HARDcopy:APRinter 290
- :HARDcopy:FACTors 291
- :HARDcopy:FFEed 292
- :HARDcopy:INKSaver 293
- :HARDcopy:LAYout 294
- :HARDcopy:NETWork:ADDRess 295
- :HARDcopy:NETWork:APPLy 296
- :HARDcopy:NETWork:DOMain 297
- :HARDcopy:NETWork:PASSword 298
- :HARDcopy:NETWork:SLOT 299
- :HARDcopy:NETWork:USERname 300
- :HARDcopy:PALette 301
- :HARDcopy:PRINter:LIST 302
- :HARDcopy:STARt 303
- :LISTer Commands 305
- :LISTer:DATA 306
- :LISTer:DISPlay 307
- :LISTer:REFerence 308
- :MARKer Commands 309
- :MARKer:MODE 311
- :MARKer:X1Position 312
- :MARKer:X1Y1source 313
- :MARKer:X2Position 314
- :MARKer:X2Y2source 315
- :MARKer:XDELta 316
- :MARKer:Y1Position 317
- :MARKer:Y2Position 318
- :MARKer:YDELta 319
- :MEASure Commands 321
- :MEASure Commands 19 331
- :MEASure:ALL 332
- :MEASure:AREa 333
- :MEASure:BWIDth 334
- :MEASure:CLEar 335
- :MEASure:COUNter 336
- :MEASure:DEFine 337
- :MEASure:DELay 340
- :MEASure:DUTYcycle 342
- :MEASure:FALLtime 343
- :MEASure:FREQuency 344
- :MEASure:NEDGes 345
- :MEASure:NPULses 346
- :MEASure:NWIDth 347
- :MEASure:OVERshoot 348
- :MEASure:PEDGes 350
- :MEASure:PERiod 351
- :MEASure:PHASe 352
- :MEASure:PPULses 353
- :MEASure:PREShoot 354
- :MEASure:PWIDth 355
- :MEASure:RESults 356
- :MEASure:RISetime 359
- :MEASure:SDEViation 360
- :MEASure:SHOW 361
- :MEASure:SOURce 362
- Example Code 363
- :MEASure:STATistics 364
- :MEASure:STATistics:INCRement 365
- :MEASure:STATistics:RESet 366
- :MEASure:TEDGe 367
- :MEASure:TVALue 369
- :MEASure:VAMPlitude 371
- :MEASure:VAVerage 372
- :MEASure:VBASe 373
- :MEASure:VMAX 374
- :MEASure:VMIN 375
- :MEASure:VPP 376
- :MEASure:VRATio 377
- :MEASure:VRMS 378
- :MEASure:VTIMe 379
- :MEASure:VTOP 380
- :MEASure:WINDow 381
- :MEASure:XMAX 382
- :MEASure:XMIN 383
- :MTESt Commands 385
- :MTESt Commands 20 389
- :MTESt:ALL 390
- :MTESt:AMASk:CREate 391
- :MTESt:AMASk:SOURce 392
- :MTESt:AMASk:UNITs 393
- :MTESt:AMASk:XDELta 394
- :MTESt:AMASk:YDELta 395
- :MTESt:COUNt:FWAVeforms 396
- :MTESt:COUNt:RESet 397
- :MTESt:COUNt:TIME 398
- :MTESt:COUNt:WAVeforms 399
- :MTESt:DATA 400
- :MTESt:DELete 401
- :MTESt:ENABle 402
- :MTESt:LOCK 403
- :MTESt:RMODe 404
- :MTESt:RMODe:FACTion:MEASure 405
- :MTESt:RMODe:FACTion:PRINt 406
- :MTESt:RMODe:FACTion:SAVE 407
- :MTESt:RMODe:FACTion:STOP 408
- :MTESt:RMODe:SIGMa 409
- :MTESt:RMODe:TIME 410
- :MTESt:RMODe:WAVeforms 411
- :MTESt:SCALe:BIND 412
- :MTESt:SCALe:X1 413
- :MTESt:SCALe:XDELta 414
- :MTESt:SCALe:Y1 415
- :MTESt:SCALe:Y2 416
- :MTESt:SOURce 417
- :MTESt:TITLe 418
- :POD Commands 419
- :POD<n>:DISPlay 421
- :POD<n>:SIZE 422
- :POD<n>:THReshold 423
- :RECall Commands 425
- :RECall:FILename 427
- :RECall:MASK[:STARt] 428
- :RECall:PWD 429
- :RECall:SETup[:STARt] 430
- :RECall Commands 22 431
- :SAVE Commands 433
- :SAVE Commands 23 435
- :SAVE:FILename 436
- :SAVE:IMAGe[:STARt] 437
- :SAVE:IMAGe:FACTors 438
- :SAVE:IMAGe:FORMat 439
- :SAVE:IMAGe:INKSaver 440
- :SAVE:IMAGe:PALette 441
- :SAVE:LISTer[:STARt] 442
- :SAVE:MASK[:STARt] 443
- :SAVE:PWD 444
- :SAVE:SETup[:STARt] 445
- :SAVE:WAVeform[:STARt] 446
- :SAVE:WAVeform:FORMat 447
- :SAVE:WAVeform:LENGth 448
- :SAVE:WAVeform:SEGMented 449
- :SAVE:WMEMory:SOURce 450
- :SAVE:WMEMory[:STARt] 451
- :SBUS<n> Commands 453
- :SBUS<n>:DISPlay 456
- :SBUS<n>:MODE 457
- :SBUS<n>:CAN Commands 458
- :SBUS<n> Commands 24 461
- :SBUS<n>:CAN:SOURce 468
- :SBUS<n>:CAN:TRIGger 469
- :SBUS<n>:I2S Commands 475
- :SBUS<n>:I2S:ALIGnment 477
- :SBUS<n>:I2S:BASE 478
- :SBUS<n>:I2S:RWIDth 480
- :SBUS<n>:I2S:TRIGger 484
- :SBUS<n>:I2S:TWIDth 492
- :SBUS<n>:I2S:WSLow 493
- :SBUS<n>:IIC Commands 494
- :SBUS<n>:IIC:ASIZe 495
- :SBUS<n>:LIN Commands 504
- :SBUS<n>:LIN:PARity 506
- :SBUS<n>:LIN:SOURce 509
- :SBUS<n>:LIN:STANdard 510
- :SBUS<n>:LIN:SYNCbreak 511
- :SBUS<n>:LIN:TRIGger 512
- :SBUS<n>:LIN:TRIGger:ID 513
- :SBUS<n>:SPI Commands 518
- :SBUS<n>:SPI:BITorder 520
- :SBUS<n>:SPI:FRAMing 523
- :SBUS<n>:SPI:WIDTh 534
- :SBUS<n>:UART Commands 535
- :SBUS<n>:UART:BASE 538
- :SBUS<n>:UART:BAUDrate 539
- :SBUS<n>:UART:BITorder 540
- :SBUS<n>:UART:FRAMing 545
- :SBUS<n>:UART:PARity 546
- :SBUS<n>:UART:POLarity 547
- :SBUS<n>:UART:SOURce:RX 548
- :SBUS<n>:UART:SOURce:TX 549
- :SBUS<n>:UART:WIDTh 556
- :SEARch Commands 557
- General :SEARch Commands 558
- :SEARch:COUNt 559
- :SEARch:MODE 560
- :SEARch:STATe 561
- :SEARch:EDGE Commands 562
- :SEARch:EDGE:SLOPe 563
- :SEARch:EDGE:SOURce 564
- :SEARch:GLITch Commands 565
- :SEARch:GLITch:GREaterthan 566
- :SEARch:GLITch:LESSthan 567
- :SEARch:GLITch:POLarity 568
- :SEARch:GLITch:QUALifier 569
- :SEARch:GLITch:RANGe 570
- :SEARch:GLITch:SOURce 571
- :SEARch:RUNT Commands 572
- :SEARch:RUNT:POLarity 573
- :SEARch:RUNT:QUALifier 574
- :SEARch:RUNT:SOURce 575
- :SEARch:RUNT:TIME 576
- :SEARch:TRANsition Commands 577
- :SEARch:TRANsition:QUALifier 578
- :SEARch:TRANsition:SLOPe 579
- :SEARch:TRANsition:SOURce 580
- :SEARch:TRANsition:TIME 581
- :SEARch:SERial:CAN Commands 582
- :SEARch Commands 25 583
- :SEARch:SERial:CAN:PATTern:ID 585
- :SEARch:SERial:CAN:MODE 587
- :SEARch:SERial:I2S Commands 588
- :SEARch:SERial:I2S:AUDio 589
- :SEARch:SERial:I2S:MODE 590
- :SEARch:SERial:I2S:RANGe 593
- :SEARch:SERial:IIC Commands 594
- :SEARch:SERial:IIC:MODE 595
- :SEARch:SERial:IIC:QUALifier 600
- :SEARch:SERial:LIN Commands 601
- :SEARch:SERial:LIN:ID 602
- :SEARch:SERial:LIN:MODE 603
- :SEARch:SERial:SPI Commands 607
- :SEARch:SERial:SPI:MODE 608
- :SEARch:SERial:UART Commands 611
- :SEARch:SERial:UART:DATA 612
- :SEARch:SERial:UART:MODE 613
- :SEARch:SERial:UART:QUALifier 614
- :SYSTem Commands 615
- :SYSTem:DATE 617
- :SYSTem:DSP 618
- :SYSTem:ERRor 619
- :SYSTem:LOCK 620
- :SYSTem:PRESet 621
- :SYSTem:PROTection:LOCK 624
- :SYSTem:SETup 625
- :SYSTem:TIME 627
- :TIMebase Commands 629
- :TIMebase:MODE 631
- :TIMebase:POSition 632
- :TIMebase:RANGe 633
- :TIMebase:REFerence 634
- :TIMebase:SCALe 635
- :TIMebase:VERNier 636
- :TIMebase:WINDow:POSition 637
- :TIMebase:WINDow:RANGe 638
- :TIMebase:WINDow:SCALe 639
- :TRIGger Commands 641
- General :TRIGger Commands 643
- :TRIGger:HFReject 644
- :TRIGger:HOLDoff 645
- :TRIGger:LEVel:HIGH 646
- :TRIGger:LEVel:LOW 647
- :TRIGger:MODE 648
- :TRIGger:NREJect 649
- :TRIGger:SWEep 650
- :TRIGger:EBURst Commands 651
- :TRIGger:EBURst:COUNt 652
- :TRIGger:EBURst:IDLE 653
- :TRIGger:EBURst:SLOPe 654
- :TRIGger:EBURst:SOURce 655
- :TRIGger[:EDGE] Commands 656
- :TRIGger[:EDGE]:COUPling 657
- :TRIGger[:EDGE]:LEVel 658
- :TRIGger[:EDGE]:REJect 659
- :TRIGger[:EDGE]:SLOPe 660
- :TRIGger[:EDGE]:SOURce 661
- :TRIGger:GLITch Commands 662
- :TRIGger:GLITch:GREaterthan 664
- :TRIGger:GLITch:LESSthan 665
- :TRIGger:GLITch:LEVel 666
- :TRIGger:GLITch:POLarity 667
- :TRIGger:GLITch:QUALifier 668
- :TRIGger:GLITch:RANGe 669
- :TRIGger:GLITch:SOURce 670
- :TRIGger:PATTern Commands 671
- :TRIGger:PATTern 672
- :TRIGger Commands 28 673
- :TRIGger:PATTern:FORMat 674
- :TRIGger:PATTern:GREaterthan 675
- :TRIGger:PATTern:LESSthan 676
- :TRIGger:PATTern:QUALifier 677
- :TRIGger:PATTern:RANGe 679
- :TRIGger:RUNT Commands 680
- :TRIGger:RUNT:POLarity 681
- :TRIGger:RUNT:QUALifier 682
- :TRIGger:RUNT:SOURce 683
- :TRIGger:RUNT:TIME 684
- :TRIGger:SHOLd Commands 685
- :TRIGger:SHOLd:SLOPe 686
- :TRIGger:SHOLd:SOURce:CLOCk 687
- :TRIGger:SHOLd:SOURce:DATA 688
- :TRIGger:SHOLd:TIME:HOLD 689
- :TRIGger:SHOLd:TIME:SETup 690
- :TRIGger:TRANsition Commands 691
- :TRIGger:TRANsition:QUALifier 692
- :TRIGger:TRANsition:SLOPe 693
- :TRIGger:TRANsition:SOURce 694
- :TRIGger:TRANsition:TIME 695
- :TRIGger:TV Commands 696
- :TRIGger:TV:LINE 697
- :TRIGger:TV:MODE 698
- :TRIGger:TV:POLarity 699
- :TRIGger:TV:SOURce 700
- :TRIGger:TV:STANdard 701
- :TRIGger:USB Commands 702
- :TRIGger:USB:SOURce:DMINus 703
- :TRIGger:USB:SOURce:DPLus 704
- :TRIGger:USB:SPEed 705
- :TRIGger:USB:TRIGger 706
- :WAVeform Commands 707
- :WAVeform Commands 29 711
- :WAVeform:BYTeorder 715
- :WAVeform:COUNt 716
- :WAVeform:DATA 717
- :WAVeform:FORMat 719
- :WAVeform:POINts 720
- :WAVeform:POINts:MODE 722
- #Vsteps = 724
- :WAVeform:SEGMented:COUNt 727
- :WAVeform:SEGMented:TTAG 728
- :WAVeform:SOURce 729
- :WAVeform:SOURce:SUBSource 733
- :WAVeform:TYPE 734
- :WAVeform:UNSigned 735
- :WAVeform:VIEW 736
- :WAVeform:XINCrement 737
- :WAVeform:XORigin 738
- :WAVeform:XREFerence 739
- :WAVeform:YINCrement 740
- :WAVeform:YORigin 741
- :WAVeform:YREFerence 742
- :WGEN Commands 743
- :WGEN:FREQuency 745
- :WGEN:FUNCtion 746
- :WGEN:FUNCtion? 747
- <signal><NL> 747
- :WGEN:FUNCtion:PULSe:WIDTh 748
- :WGEN:FUNCtion:RAMP:SYMMetry 749
- :WGEN:FUNCtion:SQUare:DCYCle 750
- :WGEN:OUTPut 751
- :WGEN:OUTPut:LOAD 752
- :WGEN:PERiod 753
- :WGEN:RST 754
- the same as a high- level 755
- :WGEN:VOLTage:HIGH 756
- :WGEN:VOLTage:LOW 757
- :WGEN:VOLTage:OFFSet 758
- :WMEMory<r> Commands 759
- :WMEMory<r>:CLEar 761
- :WMEMory<r>:DISPlay 762
- :WMEMory<r>:LABel 763
- :WMEMory<r>:SAVE 764
- :WMEMory<r>:SKEW 765
- :WMEMory<r>:YOFFset 766
- :WMEMory<r>:YRANge 767
- :WMEMory<r>:YSCale 768
- Commands" on page 860) 769
- Parameters 773
- :CHANnel:ACTivity 774
- :CHANnel:LABel 775
- :CHANnel:THReshold 776
- :CHANnel2:SKEW 777
- :CHANnel<n>:INPut 778
- :CHANnel<n>:PMODe 779
- :DISPlay:CONNect 780
- :DISPlay:ORDer 781
- Command Syntax 782
- :EXTernal:PMODe 783
- :FUNCtion:SOURce 784
- :FUNCtion:VIEW 785
- :HARDcopy:DESTination 786
- :HARDcopy:FILename 787
- :HARDcopy:GRAYscale 788
- :HARDcopy:IGColors 789
- :HARDcopy:PDRiver 790
- :MEASure:LOWer 791
- :MEASure:SCRatch 792
- :MEASure:TDELta 793
- :MEASure:THResholds 794
- :MEASure:TMAX 795
- :MEASure:TMIN 796
- :MEASure:TSTArt 797
- :MEASure:TSTOp 798
- :MEASure:TVOLt 799
- :MEASure:UPPer 801
- :MEASure:VDELta 802
- :MEASure:VSTArt 803
- :MEASure:VSTOp 804
- :MTESt:AMASk:{SAVE 805
- :MTESt:AVERage 806
- :MTESt:AVERage:COUNt 807
- :MTESt:LOAD 808
- :MTESt:RUMode 809
- :MTESt:RUMode:SOFailure 810
- :MTESt:{STARt 811
- :MTESt:TRIGger:SOURce 812
- DISK invalid 814
- PCL invalid 814
- Old Print Option: Is Now: 814
- :SAVE:IMAGe:AREA 815
- <value> ::= LIN 816
- :TIMebase:DELay 817
- :TRIGger:THReshold 818
- :TRIGger:TV:TVMode 819
- Error Messages 821
- Error Messages 33 823
- Status Reporting 829
- From Overload 831
- Event Registers 831
- From Mask Test 831
- Status Byte Register (STB) 833
- Status Reporting 34 835
- Trigger Event Register (TER) 836
- Output Queue 837
- Message Queue 838
- Error Queue 841
- Status Condition Register 843
- Arm Event Register (AER) 844
- Clearing Registers and Queues 847
- Synchronizing Acquisitions 849
- Set Up the Oscilloscope 850
- Acquire a Waveform 850
- Retrieve Results 850
- Blocking Synchronization 851
- Synchronizing Acquisitions 35 853
- Command Classifications 860 859
- Query Return Values 867 859
- Command Classifications 860
- ":DISPLAY:LABEL ON" 861
- Program Message 861
- Instruction Header 861
- Separator 861
- Program Data 861
- Simple Command Headers 863
- Compound Command Headers 863
- Common Command Headers 863
- Program Data Syntax Rules 864
- Duplicate Mnemonics 865
- Query Return Values 867
- Programming Examples 869
- VISA COM Examples 870
- Programming Examples 37 871
- VISA COM Example in C# 879
- VISA Examples 897
- VISA Example in Visual Basic 906
- VISA Example in C# 916
- SICL Examples 938
- SICL Example in Visual Basic 947
- Numerics 959
- , 277, 280 963
- function, 277, 280 965
Související produkty a manuály pro Měření, testování a kontrola Agilent Technologies InfiniiVision 3000 DSO-X 3054A
(326 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.056 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce