Agilent Technologies ESG Specifikace stáhnout pdf (Strana 71)

Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide 2-55

ESG Family Signal Generators Using Functions

Option 200 3GPP W-CDMA User Equipment Performance Tests

Figure 2-9. Out-of-Band Band 3 Blocking Characteristics Measurements

Equipment Setup 2

5. Measure the BER of the data received by the UE on RMC 12.2 kbps (25.101 V3.3) in the

presence of the positive frequency offset interferer for band 3.

The controller (or BER test platform) is measuring the bit error ratio of the UE in the

presence of both RF output waveforms, Î

(from ESG 1) and the band 3 positive

frequency offset interferer I

blocking

(from ESG 2).

6. In Table 2-30, record the measured BER value in the column titled, “Positive Frequency

Offset Interferer BER Value.”

7. Compare both the BER values recorded in columns “Negative Frequency Offset

Interferer BER Value” and “Positive Frequency Offset Interferer BER Value” to the

allowable values in the column titled, “Specification Limitations” (both values must be

within the allowable specification for a PASS status). Record the status of the UE as

PASS or FAIL in the column titled, “PASS/FAIL Status.”

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 301 302

Žádné komentáře

Agilent Technologies ESG Specifikace Strana 71