
Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide 2-79
ESG Family Signal Generators Using Functions
Option 200 3GPP W-CDMA Base Station Performance Testing
3GPP W-CDMA Base Station Performance Testing
This section includes signal generator configurations that will provide a stimulus for
bit-error-ratio analysis of base station (BS) designs based on the requirements outlined in
the 3GPP W-CDMA specification.
1
This includes performance test summaries, test-specific signal generator settings, test
system configurations, step-by-step instructions in the form of example test procedures,
and example performance test records for testing the following performance specifications:
•“Reference Sensitivity Level (3G TS 25.141.7.2)” on page 2-81
•“Dynamic Range (3G TS 25.141.7.3)” on page 2-86
•“Adjacent Channel Selectivity (3G TS 25.141.7.4)” on page 2-91
•“Blocking Characteristics (3G TS 25.141.7.5)” on page 2-96
•“Intermodulation Response Rejection (3G TS 25.141.7.6)” on page 2-105
•“Spurious Emissions (3G TS 25.141.7.7)” on page 2-112
Required Equipment
• two ESG signal generators configured as a single ESG W-CDMA base station test
solution
• one E4440A performance spectrum analyzer
• one signal source capable of providing CW at an amplitude range of
−
50 dBm to
−
15 dBm with an RF frequency range of 1.000 MHz to 12.750 GHz
• a system controller and software capable of providing control data to the base station
under test
• software and/or hardware capable of measuring, calculating and storing the base
station’s bit error ratio (BER) while exposed to the test stimulus
• BNC cables, tee splitters, signal combiners, and adapters
• adapters and antennae as required by the BS
1. 3rd Generation Partnership Project; Technical Specification Group Radio Access Networks; Base
station conformance testing (FDD) Technical Specification 3G TS 25.141 V3.4 (2000-12).
Komentáře k této Příručce