
4-176 Agilent B1500A/B1505A Programming Guide, Edition 11
Command Reference
SOVC?
If the automatic abort function for sweep source is enabled by the WM command,
the sweep measurement is automatically stopped by detecting “compliance”.
Syntax SOVC chnum,voltage
Parameters chnum : Channel number assigned to the measurement resource. Integer
expression. 1 to 10 or 101 to 1001. See Table 4-1.
voltage : Comparison reference value (in V). Numeric expression. The effective
values and resolution depend on the measurement resource. See Table
4-10, Table 4-14, and Table 4-15.
Example
Statements
OUTPUT @B1500;"SOVC 3,300"
SOVC?
This query command is effective for the HVMCU, UHCU, and UHVU. This query
command returns the comparison reference value set by the SOVC command.
Syntax SOVC? chnum
Parameters chnum : Channel number assigned to the measurement resource. Integer
expression. 1 to 10 or 101 to 1001. See Table 4-1.
Query Response voltage<CR/LF^EOI>
Comparison reference value (in V).
Example
Statements
OUTPUT @B1500;"SOVC? 3"
ENTER @B1500;A
SPM
This command specifies the output mode of the specified SPGU channel. Set for
each channel.
Execution
Conditions
The SPGU operating mode must be set to PG with the SIM 0 command.
Syntax SPM chnum,mode
Parameters chnum : SPGU channel number. Integer expression. 1 to 10 or 101 to 1002. See
Table 4-1.
mode : Settings for the output signal source. Integer expression.
Komentáře k této Příručce